A flush-mounted multifunctional exhaust unit to optimise indoor air quality and energy efficiency in MEV applications
A discreet humidity-controlled extract unit that ensures efficient ventilation, adjusting in response to the room’s humidity levels.
The concealed humidity-controlled extract unit with integrated filter to preserve the durability of installations.
Thanks to its slim styling and silent running, the VAM fan is ideal for installation in living spaces. With its powerful AC motor and its optimised design, the VAM can be connected to up to six exhaust units in the same dwelling.
With its silent operation and compact construction, the V2A whole-house exhaust fan can be discretely fitted into the inhabited space of the dwelling inside a cupboard, loft space or ceiling void..
The VCZ Smart attic exhaust fans offer several models with capacities from 530 m³/h up to 3 500 m³/h for the equipment of collective dwellings, offices, schools or other types of buildings.
The VTZ Smart fans range offers five models with capacities going from 345 m3/h up to 6 800 m3/h for the equipment of collective dwellings, offices, schools or other buildings. The VTZ Smart fans are designed for an outdoor installation, in terrace or on a pitched roof. Many connecting parts are available to adapt to different encountered cases. The VTZ Smart fans are characterized by their solidity and by an excellent energy efficiency, thanks to the use of high-performance electronic commutation motors and to an integrated pressure control device.
The EHT² is the new generation of humidity sensitive wall air inlet. Installed on the wall it is an ideal alternative to window air inlets.
Installed on the wall or on a rolling shutter casing, the EHT humidity sensitive air inlet is the ideal choice for air admission through the wall, and thus provides an alternative where lack of available space (on window frames) prevents the installation of window mounted air inlets.
The stylish design of the EHA² air inlet enables perfect integration on most windows or rolling shutter casings. With the inclusion of high efficiency acoustic foam the product reaches an acoustic attenuation of up to 44 dB when mounted with the special base and canopy. An optional device allows on demand manually closing or opening of the air inlet, complementing the humidity sensitive function available on the EHA².
With its slim design (only 31 mm thickness), the EMM² is optimised to discreetly integrate on windows.
With its flat design and its special airtightness sleeve, the EAH² air inlet is perfectly fitted to equip rolling shutter casings.
The heat recovery ventilation DX Reference system is the ideal solution for optimum air quality throughout the year while minimizing the energy consumed. This system supply healthy and preheated outdoor air into living areas.
Through the DX Evolution, a completely new range of heat recovery ventilation system has been designed by Aereco to offer you the maximal flexibility in your choice for the adequate ventilation solution. The DX Evolution product range is intended for a residential application and can be either installed in false ceiling, thanks to a small thickness, or in kitchen cupboard, due to optimized dimensions.
Heat recovery enhanced by room-by-room demand-controlled ventilation
The AWN Eco+ is a compact and fully integrated exhaust air heat pump. Here, the ventilation unit and the heat pump are combined in one. This components’ closeness allows a direct transmission of the exhaust air heat to the refrigerant which enhances the device efficiency and energy saving. The ventilation adapts the airflows according to the needs in the dwelling thanks to Aereco’s humidity-sensitive exhaust air system: the on-demand management is ensured at any time.
The heat provided throughout the year is then released by the heat pump directly to the heating water of the building heating system. The AWN Eco+ drastically reduces the energy load for heating water.
AWN Connect combines AWN Basic with Connect WP, a brine / saltwater / water heat pump designed specifically for AWN. While the AWN Basic is installed where the exhaust ducts end - above or under the roof - the Connect WP is designed for indoor installation and can be placed in the boiler room.
On the cold source side, the Connect WP cools a brine circuit up to 2 ° C and feeds the cold brine to the AWN Basic heat exchanger using an integrated feed pump. The heat is extracted from the stale air and returned to the heat pump. The heat pump raises the temperature level of the heat produced and makes it available the whole year through the heating water to the building's heating system.
In this version, AWN can be associated with third-party heat pumps via a brine buffer. The AWN Basic is a combination of an air exhaust module and a heat exchanger to ensure heat recovery.
VMX is a unique system that automatically modulates the ventilation on the basis of information received from detectors that measure CO2 concentration, movement, or presence.
One of the biggest challenges, that we are encountering today is the balance between comfort, security and the efficiency of energy. When it comes to occupants’ comfort in an indoor area, both residential as well as non-residential markets, the building constructors are providing a best in class experience for the occupants with well-equipped building automation solutions.
Nowadays, the buildings are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions. Aereco introduces the new S-CO2/T Modbus, an effective CO2 sensor specially designed to accurately assess indoor CO2 concentrations, in order to help systems optimize indoor air quality.
Aereco introduces its new range of sensors to measure the concentrations of CO2, VOCs and humidity to control buildings HVAC system.
External air inlet canopies protect the elements of the frame (windows, casings) hosting the air passage holes against bad weather and water infiltration. Their role is also aesthetic: they blend in perfectly with the frontage and windows.
By ensuring the continuity of the airflow from the outside canopy to the air inlet, the E-TFR protects the interior of the window and avoids cooling to prevent internal condensation.
Not only does the AC external canopy protect the interior of the window from water infiltration and volatile insects, it also controls the airflow to avoid over-ventilation in case of excess of pressure through a patented device. This ability makes the AC canopy particularly suitable for tall buildings or windy locations. The AC external canopy can be installed with either fixed or humidity sensitive air inlets.
